Specifications

  • Manufacturer: Kawasaki
  • Model: MULE SX 4x4 FI
  • Year: 2020
  • Type: UTILITY 2 SEATS
  • Displacement: 401cc
  • Type: 4-stroke, OHV Single
  • Bore and stroke: 82.0 x 76.0 mm
  • Cooling: Air
  • Compression ratio: 8.6:1
  • Fuel system: Fuel injection: 23 mm x 1
  • Ignition: Battery & coil
  • Lubrication: Forced lubrication (wet sump)
  • Front: type: Sealed, auto-adjusting hydraulic drums
  • Rear: type: Sealed, auto-adjusting hydraulic drums
  • Overall length: 2,710 mm
  • Overall width: 1,335 mm
  • Overall height: 1,800 mm
  • Wheelbase: 1,780 mm
  • Ground clearance: 170 mm
  • Seat height: 780 mm
  • Curb mass**: 468 kg
  • Fuel capacity: 16 L
  • Cargo box (inside) l x w x h: 1040 x 905 x 245 mm
  • Transmission: 2-speed automatic, forward / reverse
  • Final drive: Gear (Selectable 2WD/4WD) with limited slip front differential and dual-mode locking rear differential
  • Primary reduction ratio: 3.653 ~ 0.794 (Belt drive torque converter)
  • Final reduction ratio: 3.852 (16/18 x 39/9) Front, 4.000 (64/16) Rear
  • Gear ratio: forward (high): 2.916 (35/24 x 36/18)
  • Gear ratio: forward (low): 4.315 (41/19 x 36/18)
  • Gear ratio: reverse: 3.750 (30/16 x 36/18)
  • Type: Ladder Type, Tubular Steel
  • Wheel travel: front: 78 mm (3.1 in.)
  • Tire: front: 24 x 9.00-10 Tubeless
  • Wheel travel: rear: 79 mm (3.1 in.)
  • Tire: rear: 24 x 11.00-10 Tubelss
  • Caster (rake):
  • Trail: 45 mm
  • Steering angle (left/right): 43° (IN) / 38° (OUT), 43° (IN) / 38° (OUT)
  • Maximum power‡: 9.9 kW {13.5 PS} / 4,000 rpm
  • Maximum torque‡: 29.7 N·m {3.0 kgƒ·m} @ 2,400 rpm
  • Minimum turning radius‡: 3.6 mm (11.8 ft.)
  • Towing capacity‡: 500 kg (1,100 lbs.)
  • Maximum cargo bed load‡: 181 kg (400 lbs.)
  • Seating capacity‡: 2
  • Vehicle load capacity‡: 415 kg
  • Suspension, front: Independent, MacPherson Strut
  • Warranty: 36 month warranty